Nikon V1 - Manual (Page 24)

12
z
A Using a Zoom Lens
Use the zoom ring to zoom in on the subject so that it fills a larger area
of the frame, or zoom out to increase the area visible in the final photo-
graph (select longer focal lengths on the lens focal length scale to zoom
in, shorter focal lengths to zoom out).
Zoom in
Zoom out
Zoom ring
A Auto Power Off
If no operations are performed for about thirty seconds, the displays
will turn off and the power lamp (
0 5) start to blink. The camera can be
reactivated by operating the buttons, mode dial, or other camera con-
trols. If no operations are performed for about three minutes after the
displays have turned off, the camera will turn off automatically.
A Flicker
You may notice flicker or banding in the displays or in movies when
shooting under certain types of lighting, such as fluorescent or mer-
cury-vapor lamps. This can be reduced by choosing a Flicker reduc-
tion option that matches the frequency of the local AC power supply
(
0 42).
A See Also
The beep that sounds when the camera focuses or the electronic shut-
ter is used can be silenced using the Sound settings option in the
setup menu (
0 42).