Nikon S3200 - Manual (Page 123)

E 19
Connecting the Camera to a Printer (Direct Print)
Refere
nce S
e
ct
io
n
Connecting the Camera to a Printer
1
Turn off the camera.
2
Turn on the printer.
• Check printer settings.
3
Connect the camera to the printer using the included USB cable.
• Be sure that plugs are properly oriented. Do not attempt to insert plugs at an angle,
and do not use force when connecting or disconnecting the plugs.
4
The camera is automatically turned on.
• When properly connected, the PictBridge startup
screen ( 1) will be displayed in the camera monitor,
followed by the Print selection screen ( 2).
B
If the PictBridge Screen is not Displayed
Turn off the camera and disconnect the USB cable. Set Charge by computer ( E62) in the
camera’s setup menu to Off, then connect the camera again.
Print selection
1 5 / 0 5
2 0 1 2
1 2