Setup – Nikon LS-2000 User Manual

Page 29

Advertising
background image

19

3. Setup

Nikon

LS-2000 35 mm Film Scanner User’s Guide

Windows

At start-up, Windows will detect the LS-
2000 and display the dialog shown at left.

Insert the Nikon Scan CD in the computer’s
CD-ROM drive, confirm that the

Driver

from disk provided by hardware
manufacturer

radio button is selected,

and click

OK

. When the “Install from

Disk” dialog appears, enter the drive

letter of the CD-ROM drive in the

Copy

manufacturer’s files from

textbox

and click

OK

. Windows will then

register your scanner on the system.

Once the scanner has been registered, the Welcome dialog for the
Nikon Scan installer will appear on the desktop (the Welcome

dialog for scanners sold in the U.S.A. differs from that shown
below; see the reference manual for details).

Click

Nikon Scan 2.0

. If your scanner was purchased outside the

U.S.A., you will be prompted to choose a language for Nikon

Scan’s menus and dialogs. Installation can now be completed by
following the instructions provided by the installer (see the Nikon

Scan for Windows Reference Manual for details).

Advertising