Nikon IA-20 APS Film Adapter - Manual (Page 7)

7 Nikon IX240 Film Adapter IA-20 Reference Manual
3. Installation
Before installing the IA-20, make sure that your scanner is set up as
described in the Fast Track Guide and reference manual provided
with the scanner. The IA-20 should not be used where:
•
the temperature exceeds 35ºC (95ºF) or falls below 10ºC (50ºF)
• it would be subject to condensation or drastic changes in tem-
perature
• the humidity exceeds 85%
• it would be exposed to direct or reflected sunlight
• it might be subject to vibration or strong physical shocks
• there is a lot of dust
• it would be exposed to radio interference from other electronic
devices
Warning: Failure to observe the above precautions could result in
fire or in scanner malfunction.
The IA-20 can be mounted on the scanner whether the scanner is off
or on and connected to a computer. Before mounting the adapter
while the scanner is on, check that the status LED is glowing
steadily. The IA-20 should
NOT
be inserted or removed while the
status LED is blinking.