Nikon D4 - Manual (Page 24)

20
Preset Manual White Balance Preset Manual White Balance
To choose a white balance preset, select a white balance
setting of
L (page 18) and then press the U button and
rotate the sub-command dial until the desired preset (d-1
to d-4) is displayed in the rear control panel.
U button Sub-command dial Rear control panel
To measure white balance for the selected preset, place a
neutral gray or white object under the lighting that will be
used in the fi nal photograph and follow the steps below.
Choose manual focus mode.
Rotate the focus-mode selector to M.
Note
The camera may be unable to measure white balance
at high ISO sensitivities. If the camera fails to measure
white balance, reduce ISO sensitivity and try again.
11
Taking Photographs