Nikon S9600 - Manual (Page 43)

21
Th
e
Bas
ics of Shoo
ting and
Pl
a
y
b
a
ck
C
The Auto Off Function
• The time that elapses before the camera enters standby mode is about 1 minute.
The time can be changed using the Auto off setting in the setup menu ( A78).
• While the camera is in standby mode, the monitor turns back on if you perform any
of the following operations:
- Press the power switch, shutter-release button, c button, or b (e movie-
record) button.
- Rotate the mode dial.
• While the charging AC adapter is connected to the camera, the monitor turns back
on if you press the power switch. The camera turns off if you operate the shutter-
release button, mode dial,
c button, or b (e movie-record) button.
25m 0s 25m 0s
880 880
Flashes
No operations
performed
No operations
performed
3 min
Camera enters
standby mode.
Camera turns off.