Nikon P530 - Manual (Page 181)

E 65
Refe
re
nce Se
cti
o
n
Vibration Reduction
Set to reduce the effects of camera shake while shooting.
Set Vibration reduction to Off when using a tripod to stabilize the camera
during shooting.
B
Notes About Vibration Reduction
• After turning on the camera or after switching from playback mode to shooting
mode, wait for the shooting mode screen to be displayed completely before
taking images.
• Images displayed in the camera monitor immediately after shooting may be
displayed blurry.
• Vibration reduction may be unable to completely eliminate the effects of camera
shake in some situations.
Press the
d button M z tab (A9) M Vibration reduction
Option Description
g
Normal
(default setting)
Compensates camera shake that commonly occurs when
shooting at telephoto zoom positions or slow shutter
speeds. The camera automatically detects the panning
direction and only compensates for vibration caused by
camera shake.
When the camera is panned horizontally, for example,
vibration reduction only reduces vertical shake. If the
camera is panned vertically, vibration reduction only
compensates for horizontal shake.
Z
Active
Camera shake is automatically compensated during
shooting if a comparatively large camera shake is likely to
occur when shooting from a car or under poor foothold
conditions.
k Off
Vibration reduction is disabled.