Nikon SF-100 Slide Feeder Adapter LS-1000 - Manual (Page 9)

- 9 -
2.4 Cleaning the Unit
When carrying out routine maintenance and cleaning, ensure
that no volatile liquids such as alcohol, benzine, or thinner come
into contact with the SF-100 as this may cause a failure, fire, or
electric shock.
Please observe the following points:
• Before cleaning, always turn the power off, and pull out the
power plug.
• Since the cover is made from plastic material, remove dust
with a blower or a dry cloth.
Use a soft, dry cloth to remove dust from the metal panel at
the rear.
• If the unit has become badly soiled, clean with a cloth
moistened with neutral liquid detergent, then dry with a dry
cloth.
Avoid harsh substances such as alcohol, benzine, thinner, or
pesticides, as they may damage the surface, or remove the
exterior finish.
3. Parts Identification
Display LED
Magazine Cover
Binder
Ejection
Magazine
Insertion Magazine
Slide Push
Plate
Slide Push Plate
Insert Guide
Stickers