Nikon S5 - Manual (Page 92)

82
Te
chnical Not
es
Display Problem Solution
NEW CITY IS IN THE
CURRENT TIME ZONE
Destination in same
time zone as home. No need to change time zones if desti-
nation is in same time zone as home.
72
INITIALIZING LENS
CANNOT FOCUS Camera cannot focus.
Wait until message has cleared from
display and camera has zoomed all
the way out.
—
LENS ERROR Lens error.
Turn camera off and then on again. If
error persists, contact retailer or Nikon
representative.
14
LENS COVER ERROR
Finger or other obstruc-
tion prevents lens cover
from opening.
Turn camera off and remove obstruc-
tion.
2, 14
COMMUNICATIONS ERROR
USB cable disconnected
during transfer or print-
ing.
If PictureProject displays error, click
OK to exit. Resume operation after
turning camera off and reconnecting
cable.
52–53,
56
USB option incorrect. Choose correct USB option. 54
PictureProject did not
start. See the PictureProject reference man-
ual (on CD) for more information.
—
NO IMAGES ARE MARKED
FOR TRANSFER
No pictures selected for
transfer. Select pictures for transfer and try
again.
68
TRANSFER ERROR Transfer error.
• Check battery level.
• Check that USB cable is connected. 14
52–53
SYSTEM ERROR
Error has occurred in
camera’s internal cir-
cuitry.
Turn camera off , remove and reinsert
batteries, and turn camera on. If error
persists, contact retailer or Nikon rep-
resentative.
10
PRINTER ERROR
CHECK PRINTER STATUS
Printer error.
Check printer. To resume, highlight
Resume (if available) and press
button.
—
In extremely rare instances, unusual characters may appear in the monitor and the cam-
era may stop functioning. In most cases, this phenomenon is caused by a strong external
static charge. Turn the camera off , remove and replace the batteries, and then turn the
camera on again. In the event of continued malfunction, contact your retailer or Nikon
representative. Note that disconnecting the power source as described above may result
in the loss of any data not recorded to internal memory or the memory card at the time
the problem occurred. Data already recorded will not be aff ected.
Electronically Controlled Cameras