Nikon S710 - Manual (Page 61)

49
Using the high-speed continuous mode
Sh
oot
in
g cont
in
uousl
y at
hi
gh spe
ed
4
Press the shutter-release button halfway.
• The focus area glows green and focus will be locked.
• When the camera is unable to focus, the focus area will
blink. Change the composition and try pressing the
shutter-release button halfway again.
5
Press the shutter-release button the rest of the
way down.
Continuous shooting continues as long as the shutter-
release button is pressed fully until the number of shot
frames reaches the maximum available number.
C
Notes on High-speed Continuous Mode
• The speed of continuous shooting may be slower depending on shutter speed settings and the
data transfer speed of the memory card.
• As the ISO sensitivity is automatically set to a high setting, the captured pictures may appear
rough as a result.
• As the ISO sensitivity is fixed at 900 and over, proper exposure may not be obtained in clear
weather (pictures may be overexposed).
• If bright objects such as the sun or electric lights are captured during high-speed continuous
shooting, vertical streaks of light may appear in the recorded images. We recommend that you
avoid capturing bright objects during high-speed continuous shooting.
• Digital zooming is not available.
• The flash setting is fixed at W (off).
• The macro mode (A 31) and Exposure compensation (A 32) are available.
• The self-timer is not available.
• The AF-assist illumination turns off automatically regardless of the setting of the AF-assist
illumination ( A 124).
F2.8 F2.8 1/250 1/250 F2.8 1/250