Nikon 2200 - 3200 - Manual (Page 28)

18
Ba
si
c P
hotog
ra
phy
Step 2 - Frame the Picture
Ready the camera
Hold the camera steadily in both hands. Photo-
graphs can be framed in the monitor or the view-
finder.
Frame your subject
Your Nikon digital camera is equipped with two
types of built-in zoom: optical zoom, in which the
camera's telescoping lens can be used to magnify the
subject up to 3 ×, and digital zoom, in which digital
processing is used to further magnify the image up
to 4 ×, for a total of 12 ×. Use the zoom buttons to
frame your subject in the center of the monitor:
• Press the l (W) button to zoom out from
your subject, increasing the area visible in the
frame.
• Press the O (T) button to zoom in on your sub-
ject so that it fills a larger area of the frame.
• When the camera is zoomed in to maximum
magnification, holding the O (T) button down
for about one second will trigger digital zoom.
The zoom indicator will turn yellow, and the
green (AF) lamp next to the viewfinder will
blink. Use the O (T) and l (W) buttons to ad-
just zoom in the digital zoom range. To cancel
digital zoom, press l (W) until the zoom in-
dicator turns white.
1
Don't Block the Shot
To avoid dark or partially obscured pictures, keep
your fingers and other objects away from the
lens, flash window and microphone (E3200 only).
Zoom out Zoom in
AUTO 19
AUTO 19
Indicator in monitor shows
amount of zoom when ei-
ther button is pressed
Digital zoom
2