Nikon 880 - Manual (Page 28)

23
2 Turn the mode dial to AUTO
Taking Photographs
The Basics
This chapter describes the basic steps involved in taking photographs in AUTO and SCENE modes. In
these automatic, “point-and-shoot” modes, the majority of settings are controlled by the camera in
response to lighting conditions and focus distance, producing the best possible results.
Getting the Camera Ready for Use (AUTO Mode)
Release latch
and remove cap
1 Remove the lens cap
If you turn the camera on with the lens cap in place and the
mode dial set to AUTO, SCENE, P, A, M, or CSM, an error mes-
sage will appear in the monitor. To clear the message from the
display, turn the camera off and remove the lens cap.