A89), A89) to – Nikon S4300 User Manual
Page 107
89
The Setup Menu
Ge
ne
ra
l Ca
m
e
ra
Se
tu
p
g Vibration
reduction
Allows you to reduce blurring caused by camera shake
when shooting. The default setting is On.
• When using a tripod to stabilize the camera during
shooting, set this feature to Off.
U Motion
detection
Enable or disable motion detection, which reduces the
effects of subject movement and camera shake in still
images.
The default setting is Auto.
h AF assist
When set to Auto, the AF-assist illuminator (
A2) lights up
when shooting in dark surroundings to help the camera
focus. The default setting is Auto.
• The illuminator has a range of about 1.9 m (6 ft 2 in.) at
the maximum wide-angle position and about 1.1 m (3 ft
7 in.) at the maximum telephoto position.
• Even if Auto is selected, the AF-assist illuminator may
not light depending on the position of the focus area or
the scene mode that is selected.
u Digital zoom
When set to On, rotating the zoom control to
g (i) at the
maximum optical zoom position triggers digital zoom
feature (
The default setting is On.
i Sound settings
Allows you to turn various camera sounds on and off.
The Button sound and Shutter sound settings are On by
default.
• When using certain shooting modes or settings, the
operation sound is disabled.
k Auto off
Allows you to set the amount of time that passes before
the monitor turns off to save power.
The default setting is 1 min.
l/m Format
memory/Format
card
Allows you to format the internal memory (only when a
memory card is not inserted) or the memory card (when a
memory card is inserted).
• All data stored in the internal memory or on the
memory card is deleted during formatting and
cannot be restored. Be sure to transfer important
images to a computer and save them before formatting.
Option
Description
A