Nikon S6800 - Manual (Page 135)

E 23
Re
fe
re
nc
e
S
e
ct
io
n
B
If Images Are Not Displayed on the TV
Make sure that TV settings ( E84) in the setup menu conforms to the standard used by your TV.
C
Using a TV Remote Control (HDMI Device Control)
The remote control of an HDMI-CEC-compatible TV can be used to select images, start and pause
movie playback, switch between full-screen playback mode and four-image thumbnail display, etc.
• Set the HDMI device control setting (E84) of TV settings to On (default setting) and then
connect the camera and TV using an HDMI cable.
• Aim the remote control at the TV when operating it.