Nikon D4S - Manual (Page 65)

55
Wireless
Edit the following wireless settings:
• SSID: Enter the name (SSID) of the network
on which the host computer or ftp server is
located.
• Communication mode: Select Infrastructure
for wireless communication via a wireless
network access point, Ad hoc if the camera is connected to the
ftp server or computer directly.
• Channel: Select a channel (ad hoc only; in infrastructure mode, the
channel will be selected automatically).
• Authentication: The authentication used on the network. Choose
from open system, shared key, WPA-PSK, and WPA2-PSK
(infrastructure) or open system and shared key (ad hoc).
• Encryption: The encryption used on the network. The options
available depend on the authentication used:
Open : None; 64- or 128-bit WEP
Shared : 64- or 128-bit WEP
WPA-PSK : TKIP; AES
WPA2-PSK : AES
• Encryption key: If the network uses encryption, enter the network
key. The number of characters required depends on the type of
key used:
• Key index: If WEP64 or WEP128 is selected for Encryption, choose
a key index matching that used by the access point or host
computer. A key index is not required when No encryption is
selected.
WEP (64-bit) WEP (128-bit) TKIP, AES
Number of characters (ASCII) 5 13 8–63
Number of characters (hex) 10 26 64