Nikon AF-S DX 16-85mm f-3.5-5.6G ED VR - Manual (Page 19)

19
Jp
En
De
Fr
Es
Se
Ru
Nl
It
Ck
Ch
Kr
Lens care
• Be careful not to allow the CPU contacts c to
become dirty or damaged.
• If the lens mount rubber gasket b is damaged, be
sure to visit the nearest Nikon authorized dealer or
service center for repair.
• Clean lens surfaces with a blower brush. To remove
dirt and smudges, use a soft, clean cotton cloth or
lens tissue moistened with ethanol (alcohol) or lens
cleaner. Wipe in a circular motion from the center to
the outer edge, taking care not to leave traces or
touch other parts of the lens.
• Never use thinner or benzene to clean the lens, as this
could cause damage, result in a fire, or cause health
problems.
• NC filters are available to protect the front lens
element. The lens hood 1 also helps to protect the
front of the lens.
• When storing the lens in its flexible lens pouch, attach
both the front and rear lens caps. The lens can also be
stored with the lens hood 1 attached in the reverse
position.
• When the lens is mounted on a camera, do not pick
up or hold the camera and lens by the lens hood 1.
• When the lens will not be used for an extended
period of time, store it in a cool, dry place to prevent
mold. Be sure to store the lens away from direct
sunlight or chemicals such as camphor or
naphthalene.
• Do not get water on the lens or drop it in water as this
will cause it to rust and malfunction.
• Reinforced plastic is used for certain parts of the lens.
To avoid damage, never leave the lens in an
excessively hot place.
Standard accessories
• 67-mm Snap-on Front Lens Cap LC-67
• Rear Lens Cap LF-1
• Bayonet Hood HB-39
• Flexible Lens Pouch CL-1015
Optional accessories
• 67-mm screw-on filters
Incompatible accessories
• Teleconverters (all models)
• Auto Ring BR-4 and all models of Auto Extension Ring
PK, K Ring and Bellows focusing attachment.
• Attachment Ring SX-1
Other accessories may not be suitable for use with this
lens. For details, refer to the documentation provided
with accessories.