Nikon S6400 - Manual (Page 61)

43
Sh
oot
in
g
F
e
at
ures
d Sports
• The camera focuses on the area in the center of the frame. The focus area can be changed using
the touch shutter or touch AF/AE ( A69).
• Press and hold the shutter-release button all the way to capture up to 19 images continuously
at a rate of about 2 fps (when image mode is set to l).
• The camera focuses even when the shutter-release button is not pressed halfway. You may hear
the sound of the camera focusing.
• Focus, exposure, and hue are fixed at the values determined with the first image in each series.
• The frame rate with continuous shooting may vary depending upon the current image mode
setting, the memory card used, or shooting condition.
• When the shutter is released using the touch shutter function ( A69), one image is captured at
a time.
e Night portrait
• The flash always fires.
• When the camera detects a human face, it focuses on that face (
A75).
• The camera softens skin tones of human faces by applying the skin softening function ( A56).
• If no faces are detected, the camera focuses on the subject in the center of the frame.
• Tap F and tap e Night portrait to select u Hand-held or w Tripod.
• Hand-held (default setting):
- When the e icon at the top left of the monitor lights in green, press the shutter-release
button all the way to capture a series of images which will be combined into a single image
and saved.
- Once the shutter-release button is pressed all the way, hold the camera still until a still image
is displayed. After taking a picture, do not turn the camera off before the monitor switches to
the shooting screen.
- The angle of view (i.e., the area visible in the frame) seen in the saved image will be narrower
than that seen in the monitor at the time of shooting.
- If the subject moves while the camera is shooting continuously, the image may be distorted,
overlapped, or blurred.
• Tripod: Select this option when using a tripod or other means to stabilize the camera during
shooting.
- Vibration reduction is disabled even when Vibration reduction (
A104) in the setup menu
is set to On.
- One image is captured at a slow shutter speed when the shutter-release button is pressed all
the way.
• Digital zoom cannot be used.