Nikon L5 User Manual
Page 126
114
Troubleshooting
Techni
cal
Not
es
j
Electronically Controlled Cameras
In extremely rare instances, unusual characters may appear in the monitor and the camera
may stop functioning. In most cases, this phenomenon is caused by a strong external static
charge. Turn the camera off, remove and replace the batteries, and then turn the camera on
again. In the event of continued malfunction, contact your retailer or Nikon representative.
Note that disconnecting the power source as described above may result in the loss of any
data not recorded to internal memory or the memory card at the time the problem occurred.
Data already recorded will not be affected.
PictureProject does not start
when camera is connected
• Camera is off.
• Batteries are exhausted.
• USB cable is not correctly connected.
• Appropriate [USB] option is not
selected.
• Camera is not registered in Device
Manager (Windows only).
See the PictureProject reference man-
ual (on CD) for further information.
• Computer is not set to launch Picture-
Project automatically.
—
—
Pictures not displayed on televi-
sion
Choose correct video mode.
[Format memory]>[Format]
option not available
Batteries are low.
Problem
Cause/Solution
c