Nikon D3X - Manual (Page 60)

34
s
Insert the Battery
1
Turn the camera off.
Always turn the camera off
before inserting or removing
batteries.
2
Remove the battery-chamber cover.
Lift the battery-chamber cover latch,
turn it to the open (
A) position (q) and
remove the BL-4 battery-chamber cover
(w).
3
Attach the cover to the battery.
If the battery release is positioned so that
the arrow (
4) is visible, slide the battery
release to cover the arrow. Insert the two
projections on the battery into the
matching slots in the cover and slide the
battery release to reveal the arrow.
A
The BL-4 Battery-Chamber Cover
The battery can be charged with the BL-4
attached. To prevent dust from accumulating
inside the battery chamber when the battery
is not inserted, slide the battery release in the direction indicated by
the arrow (
4), remove the BL-4 from the battery, and replace it on the
camera.
The BL-1 battery-chamber cover for D2-series cameras can not be
used.
Power switch