Nikon FJ-CP1 S5 - Manual (Page 25)

16
Cleaning
Do not use detergents or volatile chemicals such as alcohol or thinner when clean-
ing the case. Failure to observe this precaution could result in damage to the
product. Use a blower or cotton swab to remove any foreign objects from the
seal. Be sure to remove any threads left behind by the swab. When cleaning the
interior of the case, use a blower or a soft, dry cloth. Do not use water, detergents,
or chemical agents of any kind. Water can damage the coating on the inside of
the lens window.
Soak the case in fresh water
Reseal the case and leave it in a basin of fresh
water for two to three hours. Operate each of
the controls a few times to remove salt. If salt
dries on the controls, they may cease to function
or their metal parts may rust, causing leakage.
Wipe dry
Dry the case thoroughly with a soft, dry cloth. Do
not use a cloth to which salt has adhered.
Let the FJ-CP1 dry in the shade
Leave the FJ-CP1 out to dry in a shady, well-ven-
tilated area.
Do Not Exposure to Sunlight or Heat
Do not use a hair dryer or other heat source or
place the case in direct sunlight. Heat could
cause deterioration, resulting in leakage.
Clean the FJ-CP1