Nikon 990 - Manual (Page 26)

▼ ▼
First Steps:
T
aking a Photo
gra
ph
26
9 Check the results
After a photograph has been taken, the autofocus lamp will
blink and an hourglass icon ( ) will be displayed in the LCD
monitor while the photograph is recorded. Before the pho-
tograph is transferred to the memory card, it will be dis-
played briefly in the LCD monitor.
10 Turn the camera off
When you have finished using the cam-
era, be sure to turn the mode dial to
OFF. To avoid wasting batteries, check
that the camera is off before putting it
away.
11 Replace the lens cap
Replace the lens cap as shown below.
Press to delete
photograph
Press to pause display for 20 s.
Press again to record photograph,
or press ( ) to delete as
shown at left. Photograph re-
corded automatically after 20 s.
MENU O F F
DELETE
SELECT
Yes
No
SET
erase images?
Delete dialog displayed. Press multi
selector up or down to highlight option,
press to right to select.
• Select Yes to delete photograph
• Select No to save photograph and
return to shooting mode
Lift latch and
replace cap
While photographs are being recorded to the memory card, the autofocus lamp
will blink, and a flashing card icon will be displayed in the LCD monitor when the
camera returns to shooting mode. Although additional pictures can be taken
while the camera saves earlier photos to the card, you should not eject the
memory card, remove the batteries, or unplug the AC adapter (available sepa-
rately) until the lamp has stopped blinking and the icon has disappeared from
the monitor. Removing the card or cutting power while recording is in progress
could result in loss of data.