Nikon S32 User Manual
Page 169
F
11
Te
chni
cal
Note
s and
In
de
x
Camera turns off without
warning.
• The camera automatically turns off to save power
(auto off function).
• The camera or battery have become too cold and
cannot operate properly.
• The inside of the camera has become hot. Leave
the camera off until the inside of the camera has
cooled, and then try turning it on again.
• The camera turns off if the USB cable connecting it
to a computer or printer is disconnected.
Reconnect the USB cable.
–
Monitor is blank.
• The camera is off.
• The battery is exhausted.
• The camera has entered standby mode to save
power. Press the power switch, shutter-release
button,
c (shooting/playback mode) button, or
b (e movie-record) button.
• The flash lamp flashes while the flash is charging.
Wait for the flash to charge.
• The camera and computer are connected via a USB cable.
• The camera and TV are connected via an audio/
video cable or an HDMI cable.
Monitor is hard to read.
• Adjust the monitor brightness.
• The monitor is dirty. Clean the monitor.
Date and time of recording
are not correct.
• If the camera clock has not been set, O flashes during
shooting and movie recording. Images and movies
saved before the clock is set are dated “00/00/0000
00:00” or “01.01.14 00:00” respectively. The shooting
date and time of still images is not displayed during
playback. Set the correct time and date using Date
and time in the camera settings menu.
• The camera clock is not as accurate as ordinary
watches or clocks. Periodically compare the time of
the camera clock with that of a more accurate
timepiece and reset as required.
Problem
Cause/Solution
A