Nikon L6 - Manual (Page 77)

65
Connecting to a Computer
Con
nec
ting to T
elevi
si
ons,
Com
puter
s, a
n
d
Pri
n
ters
5
Disconnect the camera once transfer is complete.
• If the USB option is set to [PTP]
Turn the camera off and disconnect the USB cable.
• If the USB option is set to [Mass storage]
Remove the camera from the system as described below before turning the
camera off and disconnecting the USB cable.
Windows XP Home Edition/Windows XP Professional
Click the [Safely Remove Hardware] icon (
) in the taskbar and select [Safely
remove USB Mass Storage Device] from the menu displayed.
Windows 2000 Professional
Click the [Unplug or Eject Hardware] icon (
) in the taskbar and select [Stop
USB Mass Storage Device] from the menu displayed.
Macintosh
Drag the untitled camera volume (“NO NAME”) to the Trash.
k Marking Pictures for Transfer
Pictures marked for transfer are recognized by the E icon dis-
played during playback. By default, all pictures are automati-
cally marked for transfer. Two options control transfer marking:
• [Interface]>[Auto transfer] in the setup menu: Choose [On] to
mark all new pictures for transfer (c 102).
• [Transfer marking] in the playback menu: Change marking
for existing pictures (c 88).
100NIKON 100NIKON
4 /
15:30 15:30 15:30
100NIKON
0005.JPG 0005.JPG 0005.JPG
10.10.2006 10.10.2006
4 4
10.10.2006