Nikon S8200 - Manual (Page 78)

62
Features That Can Be Set Using the Multi Selector
Sh
ooting Feat
ures
3
Frame the picture and wait for the subject to
smile.
• When the camera detects a human face, a double
border (focus area) is displayed around that face. When
the camera has focused on that face, the double
border will turn green for a moment and focus is
locked.
• Up to three faces can be detected. When the camera detects more than one face, the
double border (focus area) is displayed around the face closest to the center of the
frame, and single borders around the others.
• When using smile timer:
- If the camera detects that the face framed by the double border is smiling, the
shutter is automatically released.
- After the camera releases the shutter, it will continue to detect faces and smiles, and
will release the shutter again if it detects a smiling face.
- To end automatic shooting by smile detection, set the smile timer to OFF.
• When using smile timer continuous:
- The F icon is displayed in the shooting screen.
- If the camera detects that the face framed by the double border is smiling, the
shutter is automatically released and up to five images are captured at a rate of
about 3 fps.
- The camera will continue to detect faces and smiles until continuous shooting
ends, and will capture images continuously again if it detects a smiling face. To
finish, set the smile continuous timer to OFF.
8 4 0 8 4 0
2 9 m 0 s 2 9 m 0 s