Nikon V3 - Manual (Page 129)

105
t
Use the built-in flash for additional lighting when the subject is
poorly lit or to “fill-in” (illuminate) back-lit subjects. The built-in
flash can be used as described below, but note that some cam-
era settings automatically disable the built-in flash:
1 Raise the flash.
2 Choose a flash mode.
3 Take pictures.
The Built-in Flash
Press the flash pop-up button to raise
the flash.
Flash pop-up button
Press 3 (N) on the multi selector to
display a list of flash modes, then use
the multi selector to highlight the
desired mode and press
J to select.
The flash will fire with every shot. To
disable the flash, press it gently down-
ward until it latches.