Nikon D5200 - Manual (Page 125)

108
4
Select Choose start/end point.
Highlight Choose start/end point and press
2.
The dialog shown at right will be displayed;
choose whether the current frame will be
the starting or end point of the copy and
press
J.
5
Delete frames.
If the desired frame is not currently
displayed, press
4 or 2 to advance or
rewind (to skip to 10 s ahead or back, rotate
the command dial). To switch the current
selection from start point (
w) to end point (x)
or vice versa, press A (L).
Once you have selected the start point and/
or end point, press
1. All frames before the
selected start point and after the selected
end point will be removed from the copy.
6
Save the copy.
Highlight one of the following and press J:
• Save as new file: Save the copy to a new file.
• Overwrite existing file: Replace the original
movie file with the edited copy.
• Cancel: Return to Step 5.
• Preview: Preview the copy.
Except in the photo information “image only” page ( 0 119), edited copies are
indicated by a f icon in full-frame playback.
A (L) button