Nikon D1H - Manual (Page 221)

207
TECHNICAL NO
TES—OPTIONAL
A
CCESSORIES
Software
Two software packages are available for the D1
H
: Nikon View 5, which allows the
contents of the camera’s memory to be viewed when the camera is connected to
the computer via its IEEE 1394 interface, and Nikon Capture 3, which offers remote
control and image enhancement features. Both packages are available in Windows
and Macintosh versions.
MC-25
Adapter Cord
ML-2 Modulite
Remote
Control Set
ML-3 Modulite
Remote
Control Set
MC-30
Remote Cord
Ten-pin to two-pin adapter cord for connection to the MW-2
Radio Control Set, the MT-2 Intervalometer, the ML-2 Modulite
Control Set, and other devices with two-pin terminals.
Allows infrared remote control with a range of up to 100 m
(328´). Remote control over greater distances can be
achieved with multiple units. Requires MC-25 Adapter Cord.
Allows infrared remote control with a range of up to 8 m
(26.2´).
Remote shutter release; can be used to reduce camera shake.
Can be used to lock the shutter-release button during a
time exposure.
20 cm/
0.7´
—
—
80 cm/
2.6´
Accessory
MC-21
Extension
Cord
MC-22
Remote Cord
MC-23
Connecting
Cord
MC-20
Remote Cord
Can be connected to the MC-20, MC-22, MC-25, or MC-30.
Remote shutter release with blue, yellow, and black terminals
for connection to a remote shutter-triggering device, making it
possible to control the camera via sound or electronic signals.
Allows simultaneous operation of two D1
H
s.
Description
Remote shutter release; can be used to reduce camera shake.
It is equipped with time-exposure and timer features, emit-
ting a beep once a second while the shutter is open.
3 m/9.8´
1 m/3.3´
40 cm/
1.3´
Length
(approx.)
80 cm/
2.6´