Connecting a gps device, Compatible gps devices, For more information on – Nikon D1X User Manual

Page 132

Advertising
background image

119

AD

V

ANCED PHO

T

OGRAPHY—T

AKING PHO

T

OGRAPHS

WITH GPS

Connecting a GPS Device

When connecting a GPS device via a serial cable, be sure that the cable is connected to the
camera’s RS-232C serial interface terminal and that a 2.5-mm stero mini-jack is used for con-
nection to the camera. Using another type of connector or inser ting the connector into
another terminal could damage the camera or cable.

Compatible GPS Devices

GARMIN or MAGELLAN GPS devices compatible with the NMEA0183 ver. 2.01 protocol can
be used with you camera. (NMEA=National Marine Electronics Association)
Operation has been confirmed with the following GPS devices:

• GARMIN GPS III

• MAGELLAN COLORTRAK

Because cables for connecting GPS devices to the camera are not available from Nikon, the user
must supply a suitable cable. The RS-232 terminal on the camera is designed to fit a 2.5 mm
stereo mini-jack. To connect the camer a and the GPS device, a GND line and Data-Out line
(Data-Out here refers to the GPS device) are required. The GND line from the GPS device
must be connected to the GND line from the 2.5 mm stereo mini-jack. The Data-Out line from
the GPS device must be connected to the Data-In line from the 2.5 mm stereo mini-jack.

For more information on:

pg. 190 The setup menu
pg. 124 Photo information

DATA-IN

(Connect lead to GPS

device DATA-OUT lead)

(Not used)

GND

(Connect lead to GPS

device ground lead)

Advertising