Indesit PI950ASIX - Manual (Page 20)

20
GB
Troubleshooting
If the appliance does not function properly or at all, car ry out the following inspections before calling the
Customer Service Centre for assistance. Check for any interruptions in the gas or electricity supply lines. In
particular, check whether the gas taps for the mains supply are open.
The burner does not switch on or the flame is not steady.
Check whether
• The gas outlet holes on the burner are clogged.
• The removable parts of the burner are correctly fitted.
• Draughts occur near the appliance.
The flame does not continue to burn in the versions with safety device.
Check whether
• The knob is pressed all the way in.
• The knob is pressed long enough to activate the safety device.
• The gas holes are blocked in the area corresponding to the safety device.
The burner does not remain lighted with the minimum setting.
Check whether
• The gas outlet holes are clogged.
• Draughts occur near the appliance.
• The minimum setting has been properly adjusted.
The cookware is unstable.
Check whether
• The bottom of the cookware is perfectly flat.
• The cookware is correctly positioned in the centre of the burner or hotplate.
• The hob grids have been correctly positioned.
If, despite all the checks, the hob does not function properly and the problem persists, please contact the
Customer Service Centre. Please have the following information on hand:
• The appliance model (Mod.).
• The serial number (S/N).
This information can be found on the data plate located on the appliance and/or on the packaging.
 Never use the services of unauthorised technicians and never accept spare parts which are not original.