Installation, Positioning – Indesit K6G210SX-G User Manual

Page 2

Advertising
background image

2

GB

 Before operating your new appliance please read

this instruction booklet carefully. It contains

important information concerning the safe installation

and operation of the appliance.

 Please keep these operating instructions for future

reference. Make sure that the instructions are kept

with the appliance if it is sold, given away or moved.

 The appliance must be installed by a qualified

professional according to the instructions provided.

 Any necessary adjustment or maintenance must be

performed after the cooker has been disconnected

from the electricity supply.

Positioning

! This unit may be installed and used only in

permanently ventilated rooms according to the

British Standards Codes Of Practice: B.S. 6172/B.S.

5440, Par. 2 and B.S. 6891 Current Editions. The

following requirements must be observed:

a)The cooker should not be installed in a bed sitting

room with a volume of less than 20m

3

. If it is

installed in a room of volume less than 5m

3

an air

vent of effective area of 110cm

2

is required, if it is

installed in a room of volume between 5m

3

and

10m

3

a supplementary airvent area of 50cm2 is

required, if the volume exceeds 11m

3

no airvent is

required. However, if the room has a door or a

window which opens directly to the outside no air

vent is required even when the volume is between

5m

3

and 11m

3

.

b )During prolonged use of the appliance you may

consider it necessary to open a window to the

outside to improve ventilation.

c)If there are other fuel burning appliances in the

same room, B.S.5440 Part 2 Current Edition,

should, be consulted to determine the requisite air

vent requirements.

Levelling

If it is necessary to level the

appliance, screw the

adjustable feet into the places

provided on each corner of the

base of the cooker (see

figure).

Installation

The legs* fit into the slots on

the underside of the base of

the cooker.

Installation of the cooker

The appliance can be installed next to furniture units

which are no taller than the top of the cooker hob.

The wall in direct contact with the back panel of the

cooker must be made of non-flammable material.

During operation the back panel of the cooker could

reach a temperature of 50°C above room

temperature. For proper installation of the cooker,

the following precautions must be taken:

a)The appliance can be placed in a kitchen, dining

room or bedsit, but not in a bathroom.

b )All furniture around the appliance must be placed

at least 200 mm from the top of the cooker,

should the surface of the appliance be higher than

the worktop of this furniture. Curtains should not

be placed behind the cooker or less than 200 mm

away from the sides of the appliance.

c)Any hoods must be installed according to the

requirements in the installation manual for the

hoods themselves.

d )If the cooker is installed beneath a wall cabinet,

the latter must be situated at a minimum of 420

mm above the hob. The minimum distance

between the worktop and kitchen units made of

combustible material is 700 mm (Fig. A).

e)The wall in direct contact with the back panel of

the cooker must be made of non-flammable

materials.

f ) The cooker is fitted with a safety chain that must

be attached to a hook, secured to the wall behind

the appliance.

 Some models can have their gas connection

inverted. It is important to make sure the safety

chain is always situated on the side which

corresponds to the hose holder (Fig. B).

Fig. A

Fig. B

HOOD

420

Min.

min.

650

mm. with hood

min.

700

mm. without hood

mm.

600

Min.

mm.

420

Min.

mm.

Advertising
This manual is related to the following products: