Audiovox VOH1502 - Manual (Page 5)

4
FRONT PANEL CONTROLS
(See Figure 1)
1. Power Button – Turns the Monitor ON and
OFF.
2. Volume
p/q – Controls the volume of the
external Speakers or wired Headphone
jacks if connected. Also, used to adjust the
picture control setting when “contrast”,
“bright”, “sharpness”, “color” or “tint” is
displayed on the screen.
3. TV/AV – Each time the button is pressed
the Audio/Video source will change in the
following sequence TV, AV1, AV2 and
AUX.
4. Sensor Eye – Allows the remote control to
operate the VOH1502’s OSD system (On
Screen Display). Also used to control A/V
accessories that are connected to the
VOH1502 using the accessory cable
(P/N 8010703).
5. Three Position Dome Light Switch
•
Auto – Automatically switches on the
dome lights in conjunction with the
vehicle’s interior illumination.
•
Off – The Dome lights will not turn on in
this position.
•
On – Turns on the Dome lights.
6. Screen Release
*
– Slides in the direction
of the arrow to release the drop down
screen.
7. Menu Button – Press the MENU button,
The MENU display appears. Use the
channel
p and q buttons to highlight the
desired function, then press the ENTER
button to confirm your selection.
8. Channel p/q – Changes the TV channel
(Also used to scroll Up/Down through the
menu options).
9. ENTER Button – Use this button to
confirm your selectio n from the menu
options.
10. Dome Lights – Provide additional interior
illumination.
*
Due to the size and weight of the LCD display, it
is recommended that you support the screen with
one hand while releasing it from the closed
position with the other hand.