Audiovox VOH1502 - Manual (Page 8)

7
The stored channel numbers are displayed
in GREEN on the screen and the erased
channel numbers are displayed in RED.
NOTE: This function is also available in the
menu options under “Auto-Program”
9. AUTO PROGRAM Button
Select the correct antenna input (see page
12, Setting the “Antenna Input”) Press the
AUTO PROGRAM button. All of the
channel numbers for TV or CABLE TV will
be scanned. The active channels will be
detected and automatically stored in
memory.
NOTE: This function is also available in the
menu options under “Auto-Program”
10. ENTER Button
Use this button to confirm your selection
from the menu.
11. PICTURE SELECT Button
Each time this button is pressed the on-
screen picture adjustment display cycles
through “adjustment screens” as follows:
Then use the VOLUME +/- buttons to raise
(+) or lower (-) the level. The display will
automatically turn off if adjustments are not
made within five seconds.
BRIGHTNESS CONTRAST COLOR SHARPNESS TINT