ROTHENBERGER Modul ROLOC PLUS - Manual (Page 26)

ENGLISH 24
Symptom Possible Reason Solution
ROSCOPE 1000/i2000
Error Code 6
“Tied or Dead Data Lines” This is a self diagnostic error
where the system configures
itself to generate a test pattern
that pattern is then validated.
If the pattern is not correct, it
indicates that there is a short
circuit or open on the data lines
from the video source(s) to the
main processor. Contact Service Department
12. Accessories
Accessory Name ROTHENBERGER Part Number
ROSCOPE i2000 No. 1500000696
Replacement Module TEC No. 69601
Hook Magnet and Mirror No. 69615
Charger No. 1500000715
Module 25/16 (16 m Imager Reel) No. 1500000052
13. Disposal
Components of the unit are of recyclable material and should be put to recycling. For this purpose
registered and certified recycling companies are available. For an environmental friendly disposal
of the non-recyclable parts (e.g. electronic waste) please contact your local waste disposal
authority or contact your local ROTHENBERGER authorized service center.
For EU countries only:
Do not dispose of electric tools with domestic waste. In accordance with European Direc-
tive 2012/19/EC on waste electrical and electronic equipment and its implementation as
national law, electric tools that are no longer serviceable must be collected separately and
utilised for environmentally compatible recycling.
14. Customer service
The ROTHENBERGER service locations are available to help you (see listing in catalog or on-line)
and replacement parts and service are also available through these same service locations.
Order your accessories and spare parts from your specialist retailer or using our after-sales hotline:
Phone: + 49 (0) 61 95 / 800 - 0 Fax: + 49 (0) 6195 / 800 - 3500
www.rothenberger.com