AT&T 9357 - Manual (Page 25)

22
ANSWERING SYSTEM OPERATION
AT TOUCH TONE PHONE
Remote Access Commands (continued)
Function: Command:
Record memo Press
* 8; then mailbox number where
you want memo recorded; speak after
beep; press
# 5 to exit.
End remote access call Press
* 0.
Turn system off Press
# 0; the system announces,
“Machine off.” Press
# 0 again to turn
the system back on.
Turn system on When system is off, it answers after 10
rings and announces, “Please enter your
remote access code.”
Press
#, then enter
your remote access code.
NOTE: The remote access call will automatically end if 20 seconds
go by with no key being pressed (other than when recording or playing
messages or announcements).
9357_book/wc_1ATT 7/6/01 4:10 PM Page 22