elektraLite Dazer RGB - Manual (Page 10)

5).RGBW
The RGBW setting allows the ability to calibrate the white achieved when mixing RGB.
When RGBW is set to OFF, the output when Red, Green, and Blue is at maximum is 255 for all three colors. By definition this
combination produces a white with a blue tinge which affects all other colors if cameras and other video equipment are
"keyed" to this.
When RGBW is set to ON, the output can be white balanced to whatever looks good on camera, for example. It also serves to
balance the white into a "warm" white which makes people look a lot better when they are in the light!
See Cal 2, for how to calibrate the white when the RGBW is turned ON.
To turn RGBW either OFF or ON, go through the Root Menu until RGBW. Press Enter and then use the ↑ or ↓ buttons to get to
either OFF or ON. Once chosen, press Enter to save the setting and then Menu to exit out back to the Root Menu.
6). DV
The DV setting allows the ability of the leds to not flicker when using video camera.
The choices are NTSC or PAL. NTSC is the USA system.
To set the DV setting, go through the Root Menu until DV. Press Enter and then use the ↑ or↓ buttons to get to either NTSC or
PAL. Once chosen, press Enter to save the setting and the Menu to exit back to the Root Menu.
15. KEY
The Key function is an access password for the fixture. The KEY can be turned OFF or ON which then deactivates or
activates the password.
To set the KEY go through the Root Menu until KEY, press Enter and use the ↑ or ↓ to set the KEY to either OFF or ON. If the
Key is turned ON then a password is required to go into sensitive Menus and to change functions.
The password is ↑ ↓ ↑ ↓ (Up + Down + Up + Down)