elektraLite Dazer RGB - Manual (Page 3)

3. General Guidelines.
Elektralite Led Pro Line RGB Dazer is a lighting fixture for professional use on stages, in clubs, theatres, churches etc.
Elektralite Led Pro Line RGB Dazer should only be operated at between 120 to 240 volts and only indoors.
Elektralite Led Pro Line RGB Dazer should not be operated 24/7 (24 hours a day; 7 days a week). Elektralite Led Pro Line
RGB Dazer needs operation breaks to ensure that it will work for a long time without problems. Please do not shake the
Elektralite Led Pro Line RGB Dazer and avoid using brute force when installing or operating it.
When choosing the location to install the Elektralite Led Pro Line RGB Dazer, please make sure that it is not exposed to
extreme heat, moisture or dust and never install it outdoors. Make sure that the fixture has a good amount of free space
around it for air flow. Do not install it in a confined space or have insulation around the fixture. The minimum distance between
the Elektralite Led Pro Line RGB Dazer and the illuminated surface must be more than 3 feet.
Always mount the Elektralite Led Pro Line RGB Dazer with an appropriate safety cable.
Operate the Elektralite Led Pro Line RGB Dazer only when you are familiar with the features on the fixture. Do not permit
operation by persons not qualified.
All modifications to the Elektralite Led Pro Line RGB Dazer will invalidate the warranty. There are absolutely no
exceptions.
If Elektralite Led Pro Line RGB Dazer is operated in any way different to the one described in this manual, Elektralite Led
Pro Line RGB Dazer maybe damaged and the guarantee will be void
4. Installation
Please ensure that the Elektralite Led Pro Line RGB Dazer is hung using the appropriate "C" clamp or half cheeseboro. A
safety chain or cable should also be used as a secondary point of holding the fixture in case the clamp comes loose. Never
hang the fixture without a safety chain or cable. Make sure the Gel frame (Gel holder) is clipped into position correctly and
cannot come loose.
If you are not qualified or have any doubts about hanging the Elektralite Led Pro Line RGB Dazer then do NOT hang it.
Do not clamp the safety cable to the U bracket or clamp. That is not a secondary safety point.
A secondary safety point is any point that will adequately hold the Elektralite Led Pro Line RGB Dazer if the "C" clamp or
half cheesboro fails. Then the safety cable would be the backup and stop the fixture from falling to the ground. So do NOT fix
the safety cable to the same place that the "C"clamp is attached