elektraLite 1018 RGBWA (5-in-1) User Manual

Page 2

Advertising
background image

1. Unpacking

Thank you for choosing the Elektralite 1018 RGBWA (5-in-1) fixture. For your own safety, please read
this manual before installing the device. This manual covers important information on installation and
applications. Please keep this manual for future reference.

Elektralite 1018 (5-in-1)

wash fixture uses 18 high powered 10 watt quad leds in a balanced

arrangement giving incredible output. Please unpack the Elektralite 1018 (5-in-1) carefully and check
whether it was damaged in shipping.
The following item should be in the box with the fixture:-

Color/Gel frame

Please handle the fixture with care at all times. Do not drop. Do not hit the front lens assembly.

2. Safety Instructions.

This device has left the factory in perfect condition. In order to maintain this condition and to ensure a
safe operation, it is absolutely necessary for the user to follow the safety instructions and warning
notes written in this user manual. Elektralite 1018 (5-in-1) is a high voltage fixture. Be careful when
dealing with high voltages.

Please read this manual. If you do not read this manual and damages occur to the Elektralite

1018 (5-in-1), then it could void the warranty.
During shipping, the Elektralite 1018 (5-in-1) may have been exposed to high temperature changes or
humidity changes. So, as a precaution, do not switch the Elektralite 1018 (5-in-1) on immediately.
Condensation can damage the Elektralite 1018 (5-in-1) so leave the Elektralite 1018 (5-in-1)
switched off until it has reached room temperature. The Elektralite 1018 (5-in-1) is an INDOOR
operational fixture. Do not operate this fixture outdoors or anywhere there is high humidity.
The electric connection must carry out by a qualified person and it is absolutely essential that the

Elektralite 1018

(5-in-1) be grounded. So under no circumstances break off the ground pin on the

Edison plug or use the fixture where a ground is not present. A ground pin, like the fuse for the

Elektralite 1018 (5-in-1)

is there for safety.


Always disconnect the Elektralite 1018 (5-in-1) from the power source, when the fixture is not in use
or before cleaning it. Only unplug Elektralite 1018 (5-in-1) from the power source holding onto the
Edison plug. Never pull out the Edison plug out by just pulling on the power cord itself.

Please keep the Elektralite 1018 (5-in-1) away from children and the general public. Please be
intelligent and use common sense when operating the Elektralite 1018 (5-in-1).

Advertising