elektraLite ML-602 60W LED Moving Head Profile Spot - Manual (Page 2)

1. Unpacking
Thank you for choosing the Elektralite ML602 moving light fixture.. For your own safety, please read
this manual before installing the fixture. This manual covers important information on installation and
applications. Please keep this manual for future reference.
To keep this simple, we are going to refer to the fixture as the Elektralite ML602 throughout the manual.
The Elektralite ML602 uses a high powered 90 watt led which is run a balanced and conservative
arrangement at 60 watts. Please unpack the Elektralite ML602 carefully and check whether it was
damaged in shipping. Turn the head both horizontally (Pan) and vertically (tilt) to make sure all movement
is smooth.
The following items should be in the box with the fixture:-
Safety cable
U brackets
DMX 5 pin male to 5 pin female cable
4 spare gobos
2. Safety Instructions.
This device has left the factory in perfect condition. In order to maintain this condition and to ensure a
safe operation, it is absolutely necessary for the user to follow the safety instructions and warning notes
written in this user manual. The Elektralite ML602 is a high voltage fixture. Be careful when dealing with
high voltages.
Please read this manual. If you do not read this manual and damages occur to the Elektralite
ML602, then it could void the warranty.
During shipping, Elektralite ML602 may have been exposed to high temperature or humidity changes.
So, as a precaution, do not switch Elektralite ML602 on immediately. Condensation can damage
Elektralite ML602 so leave it switched off, until it has reached room temperature.
The electrical connection must be carry out by a qualified person and it is absolutely essential that the
Elektralite ML602 be grounded. This is imperative and is a safety issue. Do not break or bend out of the
way, the ground center pin on the plug.
Always disconnect the Elektralite ML602 from the power source, when the device is not in use or before
cleaning it. Only unplug Elektralite ML602 from the power cord. Never pull out the plug out by pulling on
the power cord.
Please keep the Elektralite ML602 away from children and the general public. Please be intelligent and
use common sense when operating the Elektralite ML602.