elektraLite ML-602 60W LED Moving Head Profile Spot - Manual (Page 7)

8. Maintenance
Now ignoring maintenance and cleaning is very good way of creating problems "down the road" and
many companies and installations do just that. However the net result is, no matter what the fixture,
premature failure!
Changing the oil in a car most people do on a regular basis.
So with the fixtures, regular maintenance is an excellent practice, if you want the fixtures to last.
So what is the maintenance for the fixture?
Clean the fans! That’s really it!
Use a small vacuum cleaner and suck the dust and “fur balls” out.
Do not use a can of co². That will just blast the dust and dirt everywhere!
The fans keep the led cool and also keep the electronics cool too.
Without the fan working efficiently and dust free, the fixtures will fail and that will be a lot more costly than
having someone vacuum the fixtures on a regular basis.
How often should the fans be cleaned? It depends on where the fixtures are; in a very dusty atmosphere
once a week. So check the fans on a regular basis, it may not need cleaned every week but a quick
“visual inspection” should be done.
The front lens should be cleaned so the light output is maintained. Use only a moist lint-free cloth. Never
use alcohol or solvents to clean the fixture.
9. Technical Specification.
 Operating voltage 100 – 250v (where the Neutral is always a Neutral not a different phase)
 Frequency 50 – 60 Hertz
 Fan cooled
 Length 12" x Width 11" x Height 19"
 Length 305mm x Width 280mm x Height 483mm
 30 pounds 14kgs (out of box)
 37 pounds 17kgs (in box)
Elektralite is a division of Group One. Group One and its divisions are constantly improving their
product range and we reserve the right to make changes without prior notice.