elektraLite CP100xt Manual Part One - Manual (Page 65)

65
Dim db o, htp and short are turned on, clear is set to zero, hilite is set to 100,
and master is set to 255.
Shu t, Re d, Gree n, Blue htp is turned on, clear is set to zero, and hilite is set to 255.
Cya n, Ma g, Ye l,
?Ro t, ?Rot ?,
Ef f, Fros t,
Prism hilite is set to zero (? is any character).
Ctr l, Lamp sudden is turned on.
Colo r, Colr? color is turned on, clear and hilite are set to zero. (? is any
character).
Gob o, Gobo? gobo is turned on, clear and hilite are set to zero. (? is any
character).
There are also four special channel names, distinguished by the fact that they are more than five
characters.
None of these special channels may have any additional parameters.
PanFine Indicates a channel used for the Pan feature’s extra resolution, in a high
Resolution fixture. This channel does not appear in the feature list, as it is
controlled by the
Pan feature.
TiltFine Same as PanFin e, but for the extra Tilt channel.
Nothing Indicates an unused channel that does not appear in the feature list.
(Unlike other names, this may be applied to more than one channel
if necessary.)
ExtDim Indicates a Dim feature that is rerouted to an external dimmer. This appears in the
feature list, but doesn’t actually use up a channel. Instead, it is routed to a completely
independent channel specified by the
Dimmer Port and Dimmer Channel
attributes.
For example: Vari*Lite VL-5
Note: if the fixture has an unused channel that is intended to be reserved for an
external dimmer, whether or not you use that channel or some other channel for the
dimmer, you must also include a
channel Nothing in order to skip over that
channel.
For instance, most high-resolution steer-able fixtures use the following order:
channel Pan ' has rotary