elektraLite CP100xt Manual Part One - Manual (Page 8)

8
THE MAIN MENU
The CP-100 MAIN MENU is the first display that you will see upon start up of the controller.
Main Menu Display
CP-100 MAIN MENU 4:59pm
F-1 Storage F-4 Miscellany
F-2 Hotkeys F-5 Triggers
F-3 Clock setting F-6 Screen Display
Each of the function keys just below the display will access the specific submenus.
The menus are as follows:
•
STORAGE
This submenu allows you access to the storage of information onto disk.
.
Storage Display
STORAGE: Name:
F1 Objects
F2 Software
F3 Memory
Within the STORAGE menu you are able to save & load the objects within the controller. The
objects consist of fixtures and show information. You are able to save & load just the fixtures in your
show, save & load just the show information itself (Cues, Chases, etc.), or save & load all of your
information.
Objects Display
OBJECTS:
F1 Save all F4 Load all
F2 Save fixtures F5 Load fixtures
F3 Save show F6 Load show
•
SOFTWARE
The SOFTWARE display allows for the saving and loading of different versions of software. After
inserting a software disk into the diskette drive and accessing the SOFTWARE display, the readout
will show you which version of software is currently installed into the CP-100 and which version is on
the diskette.