elektraLite MB 150 - Manual (Page 3)

-
２ -
Safety Instructions.
This device has left the factory in perfect condition. In order to maintain this condition and to ensure a safe
operation, it is absolutely necessary for the user to follow the safety instructions and warning notes written in
this user manual. MB150 is a high voltage fixture. Be careful when dealing with high voltages.
Please read this manual. If you do not read this manual and damages occur to MB150, then it could
void the warranty.
During shipping, MB150 may have been exposed to high temperature changes or humidity changes. So, as a
precaution, do not switch MB150 on immediately. Condensation can damage MB150 so leave MB150
switched off until it has reached room temperature.
The electric connection must be carried out by a qualified person and it is absolutely essential that MB150 be
grounded
.
Always disconnect MM150 from the power source, when the device is not in use or before cleaning it. Only
unplug MB150 from the power cord. Never pull out the plug out by pulling on the power cord.
Take care, MB150 will heat up when it is turned on and it will be very hot to touch.
Please keep MB150 away from children and the general public. Please be intelligent and use common sense
when operating MB150. If you don’t understand what that means, don’t touch the MB150!
General Guidelines.
MB150 is a lighting fixture for professional use on stages, in clubs, theatres, etc.
MB150 should only be operated at 120 volts and only indoors.
MB150 should not be operated 24/7 (24 hours a day; 7 days a week). MB150 needs operation breaks to
ensure that it will work for a long time without problems. Please do not shake MB150 and avoid using brute
force when installing or operating it.
When choosing the location to install MB150, please make sure that it is not exposed to extreme heat,
moisture or dust. The minimum distance between MB150 and the illuminated surface must be more than 3
feet.
Always mount MB150 with an appropriate safety cable. If you use the quick lock cam to hang MB150, please
make sure the 4 quick lock fasteners are locked into position correctly.
Operate MB150 only when you are familiar with the features on the fixture. Do not permit operation by persons
not qualified for operating it.
All modifications to MB150 will invalidate the warranty. There are absolutely no exceptions.
If MB150 is operated in any way different to the ones described in this manual, MB150 maybe damaged and
the guarantee will be void.