elektraLite MB 150 User Manual

Page 9

Advertising
background image

-

8 -

-

Main menu 1 (It looks like node in the display but it actually is Mode!!)

1. Press

[MODE/ESC]

to enter the main menu "MODE" (display flashing)

2. Press

[ENTER]

and select "ADDR", “RUN” or "DISP" by pressing [UP] or [DOWN] button.

3. Press

[ENTER]

for selecting the desired sub menu.

-

DMX address setting, Slave setting

-

DMX address setting

With this function, you can adjust the desired DMX-address via the display panel.
1. Select

“VALU“

by pressing [UP] or [DOWN] button.

2. Press

[ENTER]

, adjust the DMX address by pressing [UP] or [DOWN] button.

3. Press

[ENTER]

to confirm or pressing [MODE/ESC] to return to main menu.

- Slave setting

With this function, you can make the fixture as slave.
1. Select

“SLAV”

by pressing [UP] or [DOWN] button.

2. Press

[ENTER]

, the display shows “ON” or “OFF”.

3. Press [UP] to select “ON” if you wish to enable this function or press [DOWN] to select “OFF” if you don’t.
4. Press

[ENTER]

to confirm or press [MODE/ESC] to return to main menu.

-

Program Run, Master setting

With the function "RUN", you can run the internal program. You can set the number of steps under Step. You
can edit the individual scenes under Edit. You can run the individual scenes either automatically (AUTO), i.e.
with the adjusted Step-Time or sound-controlled (SOUN). The selection "ALON" means Stand Alone-mode and
"MAST" that the device is defined as master.


1. Select

"AUTO"

or "SOUN" by pressing [UP] or [DOWN] button.

2. Press

[ENTER]

for selecting the desired extension menu.

3. Select

"ALON"

or "MAST" by pressing [UP] or [DOWN] button.

Advertising