elektraLite UFO 8 User Manual
Page 2
1. Unpacking
Thank you for choosing the UFO 8 fixture. For your own safety, please read this manual before
installing the device. This manual covers important information on installation and applications. Please
keep this manual for future reference.
UFO 8 wash fixture uses 8 high powered 3 watt leds in a balanced arrangement giving you incredible
output. Please unpack it carefully and check whether it was damaged in shipping.
The following items should be in the box with the fixture:-
Hanging Clamp
Power cable
DMX 3 pin male to 3 pin female cable
2. Safety Instructions.
This device has left the factory in perfect condition. In order to maintain this condition and to ensure a
safe operation, it is absolutely necessary for the user to follow the safety instructions and warning
notes written in this user manual. UFO 8 is a high voltage fixture. Be careful when dealing with high
voltages.
Please read this manual. If you do not read this manual and damages occur to UFO 8, then it
could void the warranty.
During shipping, UFO 8 may have been exposed to high temperature changes or humidity changes.
So, as a precaution, do not switch UFO 8 on immediately. Condensation can damage UFO 8 so leave
UFO 8 switched off until it has reached room temperature.
The electric connection must carry out by a qualified person and it is absolutely essential that UFO 8
be grounded.
Always disconnect UFO 8 from the power source, when the device is not in use or before cleaning it.
Only unplug UFO 8 from the power cord. Never pull out the plug out by pulling on the power cord.
Please keep UFO 8 away from children and the general public. Please be intelligent and use common
sense when operating UFO 8.