elektraLite UFO 8 - Manual (Page 5)

7. DMX 512 Setting (address).
Sets up the address for the dmx.
Using the Menu button in the root menu go to DMX
Press Enter to get into DMX and the display will read the current dmx channel.
The display will read for example d.001
This means the fixture's current address is 1
To change it, use the
↑ or ↓ buttons to get to the correct address.
Confirm and save the new dmx address setting by pressing the ENTER button.
8. Pan Invert.
The pan movement of the fixture can be reversed by using this function.
Using the Menu button in the root menu go to Pan
Press ENTER and select either Yes (to invert the pan) or No (to keep it at default setting).
Use the
↑ or ↓ to select Yes or No.
Confirm and save the new pan setting by pressing the ENTER button.
9. Tilt Invert.
The tilt movement of the fixture can be reversed by using this function.
Using the Menu button in the root menu go to Tilt
Press ENTER and select either Yes (to invert the tilt) or No (to keep it at default setting).
Use the
↑ or ↓ to select Yes or No.
Confirm and save the new tilt setting by pressing the ENTER button.
10. Mode
There are 4 modes of operation. This is the way control of the fixture is achieved. They are
DMX, as a slave (to a master UFO 8) , Automatic or sound activated.
The default is DMX but this can be changed as follows.
Using the Menu button in the root menu go to Mode.
Press Enter and select from the 4 choices of operation.
Use the
↑ or ↓ to select the mode of operation.
Confirm and save the mode of operation by pressing the ENTER button.