Ferguson Ariva T650i - Manual (Page 8)

4. Remote control
Due to the standardization of Ferguson equipment, the majority of these devices use the same
remote control unit RCU240.
Turns the receiver on and sets it in standby mode.
F1 Switching between the list of television and radio channels.
F2 Exit menu.
F3 Changes the image resolution. The following resolutions are available: 576i,
576p, 720p, 1080i, 1080p.
F4 Add new event to scheduled recording.
1, 2, 3, 4, 5, 6, 7, 8,
9, 0 Select particular channel number on a channel list.
Enter numeric values.
info Displays information about the current programme.
guide Displays the electronic programme guide.
Used to change the volume level (lower, higher).
Switches the sound on and off.
Switches to the next or previous channel.
Menu navigation.
Switching between the list of television and radio channels.
menu Exit menu.
back Changes the image resolution. The following resolutions are available: 576i,
576p, 720p, 1080i, 1080p.
text Add new event to scheduled recording.
audio Select particular channel number on a channel list.
Enter numeric values.
sub Displays information about the current programme.
find Displays the electronic programme guide.
Used to change the volume level (lower, higher).
pvr Switches the sound on and off.
fav Switches to the next or previous channel.
8