Ferguson Ariva T50 - Manual (Page 27)

How do I change a channel name?
Proceed to the editing of channel lists. Select a channel and press OK in order to see a preview
in a small window. Press the blue button in order to pass to the channel edition menu. Press the
green button in order to switch on the channel name change function. Use the numerical
keyboard in order to change the channel name.
Confirm the new name by pressing the yellow button. Next press the green button again to
switch off the channel name change function. In this way you can change the name of one or
more channels. Once you are finished, press EXIT. A message will appear asking you to confirm
the changes made. If you fail to do it, the changes made will not be saved!
16.2 Radio channel list
In this menu you can edit the list of radio channels. Editing is effected by means of the coloured
buttons on the remote control unit. The raised colour function is active - select OK on the
selected channel in order to use it. EXIT, in order to save.
16.3 Delete all
This option allows you to remove all channels from the
channel list. Note: This operation cannot be reversed! Make
sure that you are certain that you want to remove all of the
channels?
Having selected this option, you should wait a while for all of
the options available for the channel list to be highlighted as
unavailable.
27