Ferguson Ariva T50 - Manual (Page 30)

17.6 REC - recording
This function is available only when an external USB memory device is correctly connected!!!
1. Select a channel and press the REC
●
button. The present
channel will now be recorded.
2. If you press the REC button again, a list of options will be
displayed, where you can determine the duration of the
recording (by default, this is 2 hours).
3. The information bar indicates which programme you are
recording and viewing.
4. In order to terminate recording, press the STOP button and
confirm your decision.
Keep in mind that during recording, the information bar may be hidden by means of the EXIT
button. In order to restore the bar, press REC again.
Browsing through a recording – during recording.
1. The contents of a recording are available for browsing in the course of recording.
2. Use the Fast forward and Rewind buttons to navigate within a current recording and press the
PLAY button in order to start viewing from a selected moment.
3. You can set the red cursor by means of the LEFT/RIGHT buttons and confirm with OK in order
to start viewing from a selected moment.
4. Another method consists in moving by means of the / keys. Scrolling is effected by the
number of minutes defined in the DVR configuration menu. Keep in mind that this function is
available only when the time of the recording exceeds the selected scroll time.
SEMI-TWIN TUNER
The receiver is equipped with a so-called SEMI-TWIN TUNER; during recording, this function
allows you to watch a different channel broadcast on the same frequency.
1. When recording a channel, press OK in order to display
a list of channels available from this transponder.
2. If the recorded channel is not scrambled (FTA) - select
any other channel, which you want to watch.
3. If the recorded channel is scrambled - select any other
not scrambled (FTA) channel, which you want to watch.
4. You can stop recording at any time by pressing the
STOP button.
30