Ferguson D-990 HX - Manual (Page 12)

8
MOVE
CAUTION!
DO NOT OPEN
RISK OF ELECTRIC SHOCK
ACHTUNG!
NICHT ÖFFNEN
LEBENSGEFAHR
UWAGA!
NIE OTWIERAĆ
RYZYKO PORAŻENIA
D-990 HX
DVD Player
DIGITAL AUDIO OUT / ANALOG VIDEO OUT
S-VIDEO CVBS COAXIAL
Y Pb Pr
OPTICAL HDMI
VIDEO AUDIO
DIGITAL OUT
AUDIO 5.1 ANALOG OUT
SL FL CENT
SR FR SW
SCART
VIDEO AUDIO ANALOG OUT
AC 110-240V~
50/60 Hz 12W
AUDIO
IN
DIGITAL
ENGLISH
Connections
Optional: Connecting a supported
USB devices and memory cards
Using USB port
You can only view the content of supported
USB devices through this DVD system.
A
Connect the supported USB device
directly to the USB port on the front panel
(as shown on the above illustration).
B
Press INPUT button on the remote
control in order to view the files stored in
the supported USB device.
C
You have to stop playback before
removing the supported USB device from
the USB port.
Helpful hints:
 The USB port supports playback of JPEG/
audio files/video files.
 Not all portable audio/video players and
digital cameras are supported.
 While connected to a card reader, only
one card can be read at the same time.
 Only format FAT16, FAT32 partitions are
supported by USB. NTFS is not supported
 Part of external hard disk drives without
separate power supply may not work.

If the USB device does not fit into the USB
port, a USB extension cable is required.
Optional: Connecting Digital AV
Receiver
Receiver has a PCM, Dolby Digital, or
DTS decoder
A
Select one of the video connections
(CVBS VIDEO IN, SCART or COMPONENT
VIDEO IN) depending on the options
available on your TV.
B
Connect the COAXIAL or OPTICAL jack
of the DVD player to the corresponding
Digital Audio In jack on your Receiver
(cable not supplied).
C
Set the DVD Player’s Digital Output to
PCM-Only or RAW depending on the
capabilities of your Receiver.
Helpful hint:
 If the audio format of the Digital Output
does not match the capabilities of your
receiver, the receiver will produce a
strong, distorted sound or no sound at all.
AV Receiver