Avenview DVI-VIDEOWALL-9X - Manual (Page 12)

www.avenview.com|12
1.10 Software Panel
Button Name Description & Function
State Please refer to Section 1.12
Setting Serial Port Setting –Select the correct COM Port for Connection to device.
Connect Once the correct COM port selected this button activates connection to device
Disconnect Disconnects communication to the RS232 port
System Please refer to section 1.14 (System Control)
Input Resolution Set the Input Resolution of the source 800x600@60Hz to 1920X1200@60Hz
Main Source Choose which source will be the MAIN from CVBS\SVIDEO\VGA\DVI HDMI
Sub Source Choose which source will be the SUB from CVBS\SVIDEO\VGA\DVI HDMI
Display Layout Mode Choose your OUTPUT Layout Main Full Screen\Sub Full\PIP Mode\Side By
side\Custom
Examples of 3 supported Videowall Functions